Telma Control Module
Part Number: TIG31062

The TRCM is a new control module with modernized architecture and features such as PC interface for diagnostics and configuration as well as the ability to obtain speed, ABS, and other information by listening to the vehicle CAN bus.

 
Installation Guides

TL103024 Universal Wiring Installation Procedure TRCM no CAN

TL103037 Universal Wiring Installation Procedure TRCM J1939

TL103036 Telma Desktop Software Installation Guide

  

---

Wiring Diagrams

TL134054 Universal Air brake with TRCM (no CAN)

TL134055 Universal Hydraulic brake with TRCM (no CAN) 

TL134056 TRCM retrofit to TID11009 Control Box (no CAN) 

TL134057 Air Brake with TRCM and J1939 

TL134059 Wiring TRCM Air brakes JC241105 conversion

  

---

PC Interface Software

Latest Version:
01.25.2012 Telma Desktop         Download ZIP file

Software Installation Manual:
TL103036 Telma Desktop Software Installation Guide

Please note: the old software version (04.04.2011) of Telma Desktop software is not compatible with the newly relased product (since January 2012, Firmware version 11.12.22).  Please install the latest version of software available above to configure modules with 11.12.22 version firmware. More info: TL105090 TRCM with J1939 and DSC .

 

Serial Port (DB9) Required
 
To connect to the TRCM you will need a Serial Port (9 pin D connector) on your computer. If you do not have a Serial port, you will need a USB to Serial Adapter:
TIG01027 USB to Serial Adapter

TIG01027 USB to Serial Adapter Drivers: USB to Serial Drivers

---

ABS Interface (JC24####) to TRCM conversion

Order the following:

TIG31062 Control Module
TID11044 TRCM Cab Harness

TIG01027 USB to Serial Adapter (if needed)

If your vehicle is equipped with the TID11009 Control Box, use wiring diagram TL134056 to connect the TRCM to the Control Box.
 

 
Order Parts

Please contact us Toll Free at 800-797-7714 x2 for parts ordering.